Skip to main content

ETAP

ETAP is a Power System Simulation software which is a fully integrated AC and DC electrical power system analysis tool. Engineers use ETAP in thousands of companies and electric utilities worldwide in the design, analysis, maintenance, and operation of electrical power systems. The AC network includes the following ETAP modules:

In addition to Network Analysis capabilities, ETAP offers several powerful analysis modules for Distribution Systems design. ETAP supports balanced or unbalanced3-phase, 2-phase and 1-phase systems for radial, looped or meshed network including per-phase voltage drop and power flow analysis, fault calculations, Protective Device Coordination (ETAP Star) Software, Optimal Capacitor Placement Software, Optimal Load Flow Software,Reliability Assessment Analysis Software, Switching Sequence Management Software, and more.

Distributions Systems Software Key Features

  • Balanced and unbalanced load flow and voltage drop analysis
  • Protective device coordination including extensive recloser modeling and sequencing
  • Optimal capacitor placement and sizing to minimize losses and improve voltage profile
  • Comprehensive load modeling
  • Advanced reliability assessment and distribution reliability analysis
  • Switching sequence management for load transfer simulations
  • GIS Map interface

ETAP offers a DEMO version which you can download through this link ETAP DEMO

A tutorial is also provided in the etap site for user orientation: TUTORIALS

Comments

Popular posts from this blog

PARTS OF A POWER TRANSFORMER

What are the name of the basic parts of a Power Transformer? We can not deny the fact that only a handful of electrical engineering students are presently familiar with power transformers especially on what it looks like. Unlike a transformer we found in our homes, a power transformer’s appearance and construction is somewhat more complicated. It is not just a simple winding with a primary and secondary terminal although basically any transformer has one. The function that a power transformer plays in an electrical system is very important that an electric utility can not afford to loss it during its operation. Our discussion here will focus more on the basic parts and functions of a power transformer that are usually tangible whenever you go to a substation . Although not all power transformers are identical, nonetheless they all have the following listed parts in which the way of construction may differ.

ELECTRIC MOTOR NAMEPLATE SPECIFICATIONS

How do we interpret an electric motor nameplate? Motor standards are established on a country by country basis.Fortunately though, the standards can be grouped into two major categories: NEMA and IEC (and its derivatives). In North America, the National Electric Manufacturers Association (NEMA) sets motor standards, including what should go on the nameplate (NEMA Standard MG 1-10.40 "Nameplate Marking for Medium Single-Phase and Polyphase Induction Motors").

DISADVANTAGES OF Y-Y CONNECTION IN THREE PHASE SYSTEM

What are the disadvantages in using y-y connection? The Y-Y transformer connection was poorly understood in the early days of power engineering and it received a very bad reputation when it was first used; in fact, this connection was avoided for a long time until its limitations were overcome by good engineering practice. Some of the inherent disadvantages of the Y-Y connection are discussed below: