Skip to main content

SCADA ARCHITECTURES: NETWORKED SYSTEM

SCADA ARCHITECTURES: NETWORKED SYSTEM
What is a SCADA third generation system known as networked system use for?

SCADA systems have evolved in parallel with the growth and sophistication of modern computing technology. The following sections will provide a description of the following three generations of SCADA systems:


Networked SCADA Systems

The current generation of SCADA master station architecture is closely related to that of the second generation, with the primary difference being that of an open system architecture rather than a vendor controlled, proprietary environment. There are still multiple networked systems, sharing master station functions. There are still RTUs utilizing protocols that are vendor-proprietary. The major improvement in the third generation is that of opening the system architecture, utilizing open standards and protocols and making it possible to distribute SCADA functionality across a WAN and not just a LAN.

Open standards eliminate a number of the limitations of previous generations of SCADA systems. The utilization of off-the-shelf systems makes it easier for the user to connect third party peripheral devices (such as monitors, printers, disk drives, tape drives, etc.) to the system and/or the network.

As they have moved to “open” or “off-the-shelf” systems, SCADA vendors have gradually gotten out of the hardware development business. These vendors have looked to system vendors such as Compaq, Hewlett-Packard, and Sun Microsystems for their expertise in developing the basic computer platforms and operating system software. This allows SCADA vendors to concentrate their development in an area where they can add specific value to the system–that of SCADA master station software.

The major improvement in third generation SCADA systems comes from the use of WAN protocols such as the Internet Protocol (IP) for communication between the master station and communications equipment. This allows the portion of the master station that is responsible for communications with the field devices to be separated from the master station “proper” across a WAN. Vendors are now producing RTUs that can communicate with the master station using an Ethernet connection. Figure below represents a networked SCADA system.

Another advantage brought about by the distribution of SCADA functionality over a WAN is that of disaster survivability. The distribution of SCADA processing across a LAN in second-generation systems improves reliability, but in the event of a total loss of the facility housing the SCADA master, the entire system could be lost as well. By distributing the processing across physically separate locations, it becomes possible to build a SCADA system that can survive a total loss of any one location. For some organizations that see SCADA as a super-critical function, this is a real benefit.


third generation scada

source: National Communication System, Technical Information Bulletin 04-1
Labels:

Comments

Post a Comment

Popular posts from this blog

PARTS OF A POWER TRANSFORMER

What are the name of the basic parts of a Power Transformer? We can not deny the fact that only a handful of electrical engineering students are presently familiar with power transformers especially on what it looks like. Unlike a transformer we found in our homes, a power transformer’s appearance and construction is somewhat more complicated. It is not just a simple winding with a primary and secondary terminal although basically any transformer has one. The function that a power transformer plays in an electrical system is very important that an electric utility can not afford to loss it during its operation. Our discussion here will focus more on the basic parts and functions of a power transformer that are usually tangible whenever you go to a substation . Although not all power transformers are identical, nonetheless they all have the following listed parts in which the way of construction may differ.
50 comments
click here to continue

ELECTRIC MOTOR FRAME SIZE STANDARD SPECIFICATIONS

ELECTRIC MOTOR FRAME SIZE STANDARD SPECIFICATIONS How is electric motor frame size being specified? Motor frame dimensions have been standardized with a uniform frame size numbering system. This system was developed by NEMA and specific frame sizes have been assigned to standard motor ratings based on enclosure, horsepower and speed. The current standardized frames for integral horsepower induction motors ranges from 143T to 445T. These standards cover most motors in the range of one through two hundred horsepower. Typical example of where you can locate the frame is shown in Fig 1.2.D – Frame No. The numbers used to designate frame sizes have specific meanings based on the physical size of the motor. Some digits are related to the motor shaft height and the remaining digit or digits relate to the length of the motor. The rerate, or frame size reduction programs were brought about by advancements in motor technology relating mainly to higher temperature ratings of insulating mate
5 comments
click here to continue

ELECTRIC MOTOR NAMEPLATE SPECIFICATIONS

How do we interpret an electric motor nameplate? Motor standards are established on a country by country basis.Fortunately though, the standards can be grouped into two major categories: NEMA and IEC (and its derivatives). In North America, the National Electric Manufacturers Association (NEMA) sets motor standards, including what should go on the nameplate (NEMA Standard MG 1-10.40 "Nameplate Marking for Medium Single-Phase and Polyphase Induction Motors").
43 comments
click here to continue